Sindbad~EG File Manager
use std::error;
use std::fmt;
use std::str::{self, FromStr};
use serde::{de, ser};
/// A parsed TOML datetime value
///
/// This structure is intended to represent the datetime primitive type that can
/// be encoded into TOML documents. This type is a parsed version that contains
/// all metadata internally.
///
/// Currently this type is intentionally conservative and only supports
/// `to_string` as an accessor. Over time though it's intended that it'll grow
/// more support!
///
/// Note that if you're using `Deserialize` to deserialize a TOML document, you
/// can use this as a placeholder for where you're expecting a datetime to be
/// specified.
///
/// Also note though that while this type implements `Serialize` and
/// `Deserialize` it's only recommended to use this type with the TOML format,
/// otherwise encoded in other formats it may look a little odd.
///
/// Depending on how the option values are used, this struct will correspond
/// with one of the following four datetimes from the [TOML v1.0.0 spec]:
///
/// | `date` | `time` | `offset` | TOML type |
/// | --------- | --------- | --------- | ------------------ |
/// | `Some(_)` | `Some(_)` | `Some(_)` | [Offset Date-Time] |
/// | `Some(_)` | `Some(_)` | `None` | [Local Date-Time] |
/// | `Some(_)` | `None` | `None` | [Local Date] |
/// | `None` | `Some(_)` | `None` | [Local Time] |
///
/// **1. Offset Date-Time**: If all the optional values are used, `Datetime`
/// corresponds to an [Offset Date-Time]. From the TOML v1.0.0 spec:
///
/// > To unambiguously represent a specific instant in time, you may use an
/// > RFC 3339 formatted date-time with offset.
/// >
/// > ```toml
/// > odt1 = 1979-05-27T07:32:00Z
/// > odt2 = 1979-05-27T00:32:00-07:00
/// > odt3 = 1979-05-27T00:32:00.999999-07:00
/// > ```
/// >
/// > For the sake of readability, you may replace the T delimiter between date
/// > and time with a space character (as permitted by RFC 3339 section 5.6).
/// >
/// > ```toml
/// > odt4 = 1979-05-27 07:32:00Z
/// > ```
///
/// **2. Local Date-Time**: If `date` and `time` are given but `offset` is
/// `None`, `Datetime` corresponds to a [Local Date-Time]. From the spec:
///
/// > If you omit the offset from an RFC 3339 formatted date-time, it will
/// > represent the given date-time without any relation to an offset or
/// > timezone. It cannot be converted to an instant in time without additional
/// > information. Conversion to an instant, if required, is implementation-
/// > specific.
/// >
/// > ```toml
/// > ldt1 = 1979-05-27T07:32:00
/// > ldt2 = 1979-05-27T00:32:00.999999
/// > ```
///
/// **3. Local Date**: If only `date` is given, `Datetime` corresponds to a
/// [Local Date]; see the docs for [`Date`].
///
/// **4. Local Time**: If only `time` is given, `Datetime` corresponds to a
/// [Local Time]; see the docs for [`Time`].
///
/// [TOML v1.0.0 spec]: https://toml.io/en/v1.0.0
/// [Offset Date-Time]: https://toml.io/en/v1.0.0#offset-date-time
/// [Local Date-Time]: https://toml.io/en/v1.0.0#local-date-time
/// [Local Date]: https://toml.io/en/v1.0.0#local-date
/// [Local Time]: https://toml.io/en/v1.0.0#local-time
#[derive(PartialEq, Eq, Clone)]
pub struct Datetime {
/// Optional date.
/// Required for: *Offset Date-Time*, *Local Date-Time*, *Local Date*.
pub date: Option<Date>,
/// Optional time.
/// Required for: *Offset Date-Time*, *Local Date-Time*, *Local Time*.
pub time: Option<Time>,
/// Optional offset.
/// Required for: *Offset Date-Time*.
pub offset: Option<Offset>,
}
/// Error returned from parsing a `Datetime` in the `FromStr` implementation.
#[derive(Debug, Clone)]
pub struct DatetimeParseError {
_private: (),
}
// Currently serde itself doesn't have a datetime type, so we map our `Datetime`
// to a special valid in the serde data model. Namely one with these special
// fields/struct names.
//
// In general the TOML encoder/decoder will catch this and not literally emit
// these strings but rather emit datetimes as they're intended.
pub const FIELD: &str = "$__toml_private_datetime";
pub const NAME: &str = "$__toml_private_Datetime";
/// A parsed TOML date value
///
/// May be part of a [`Datetime`]. Alone, `Date` corresponds to a [Local Date].
/// From the TOML v1.0.0 spec:
///
/// > If you include only the date portion of an RFC 3339 formatted date-time,
/// > it will represent that entire day without any relation to an offset or
/// > timezone.
/// >
/// > ```toml
/// > ld1 = 1979-05-27
/// > ```
///
/// [Local Date]: https://toml.io/en/v1.0.0#local-date
#[derive(PartialEq, Eq, Clone)]
pub struct Date {
/// Year: four digits
pub year: u16,
/// Month: 1 to 12
pub month: u8,
/// Day: 1 to {28, 29, 30, 31} (based on month/year)
pub day: u8,
}
/// A parsed TOML time value
///
/// May be part of a [`Datetime`]. Alone, `Time` corresponds to a [Local Time].
/// From the TOML v1.0.0 spec:
///
/// > If you include only the time portion of an RFC 3339 formatted date-time,
/// > it will represent that time of day without any relation to a specific
/// > day or any offset or timezone.
/// >
/// > ```toml
/// > lt1 = 07:32:00
/// > lt2 = 00:32:00.999999
/// > ```
/// >
/// > Millisecond precision is required. Further precision of fractional
/// > seconds is implementation-specific. If the value contains greater
/// > precision than the implementation can support, the additional precision
/// > must be truncated, not rounded.
///
/// [Local Time]: https://toml.io/en/v1.0.0#local-time
#[derive(PartialEq, Eq, Clone)]
pub struct Time {
/// Hour: 0 to 23
pub hour: u8,
/// Minute: 0 to 59
pub minute: u8,
/// Second: 0 to {58, 59, 60} (based on leap second rules)
pub second: u8,
/// Nanosecond: 0 to 999_999_999
pub nanosecond: u32,
}
/// A parsed TOML time offset
///
#[derive(PartialEq, Eq, Clone)]
pub enum Offset {
/// > A suffix which, when applied to a time, denotes a UTC offset of 00:00;
/// > often spoken "Zulu" from the ICAO phonetic alphabet representation of
/// > the letter "Z". --- [RFC 3339 section 2]
///
/// [RFC 3339 section 2]: https://datatracker.ietf.org/doc/html/rfc3339#section-2
Z,
/// Offset between local time and UTC
Custom {
/// Hours: -12 to +12
hours: i8,
/// Minutes: 0 to 59
minutes: u8,
},
}
impl fmt::Debug for Datetime {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
fmt::Display::fmt(self, f)
}
}
impl fmt::Display for Datetime {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
if let Some(ref date) = self.date {
write!(f, "{}", date)?;
}
if let Some(ref time) = self.time {
if self.date.is_some() {
write!(f, "T")?;
}
write!(f, "{}", time)?;
}
if let Some(ref offset) = self.offset {
write!(f, "{}", offset)?;
}
Ok(())
}
}
impl fmt::Display for Date {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
write!(f, "{:04}-{:02}-{:02}", self.year, self.month, self.day)
}
}
impl fmt::Display for Time {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
write!(f, "{:02}:{:02}:{:02}", self.hour, self.minute, self.second)?;
if self.nanosecond != 0 {
let s = format!("{:09}", self.nanosecond);
write!(f, ".{}", s.trim_end_matches('0'))?;
}
Ok(())
}
}
impl fmt::Display for Offset {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
match *self {
Offset::Z => write!(f, "Z"),
Offset::Custom { hours, minutes } => write!(f, "{:+03}:{:02}", hours, minutes),
}
}
}
impl FromStr for Datetime {
type Err = DatetimeParseError;
fn from_str(date: &str) -> Result<Datetime, DatetimeParseError> {
// Accepted formats:
//
// 0000-00-00T00:00:00.00Z
// 0000-00-00T00:00:00.00
// 0000-00-00
// 00:00:00.00
if date.len() < 3 {
return Err(DatetimeParseError { _private: () });
}
let mut offset_allowed = true;
let mut chars = date.chars();
// First up, parse the full date if we can
let full_date = if chars.clone().nth(2) == Some(':') {
offset_allowed = false;
None
} else {
let y1 = u16::from(digit(&mut chars)?);
let y2 = u16::from(digit(&mut chars)?);
let y3 = u16::from(digit(&mut chars)?);
let y4 = u16::from(digit(&mut chars)?);
match chars.next() {
Some('-') => {}
_ => return Err(DatetimeParseError { _private: () }),
}
let m1 = digit(&mut chars)?;
let m2 = digit(&mut chars)?;
match chars.next() {
Some('-') => {}
_ => return Err(DatetimeParseError { _private: () }),
}
let d1 = digit(&mut chars)?;
let d2 = digit(&mut chars)?;
let date = Date {
year: y1 * 1000 + y2 * 100 + y3 * 10 + y4,
month: m1 * 10 + m2,
day: d1 * 10 + d2,
};
if date.month < 1 || date.month > 12 {
return Err(DatetimeParseError { _private: () });
}
if date.day < 1 || date.day > 31 {
return Err(DatetimeParseError { _private: () });
}
Some(date)
};
// Next parse the "partial-time" if available
let next = chars.clone().next();
let partial_time = if full_date.is_some()
&& (next == Some('T') || next == Some('t') || next == Some(' '))
{
chars.next();
true
} else {
full_date.is_none()
};
let time = if partial_time {
let h1 = digit(&mut chars)?;
let h2 = digit(&mut chars)?;
match chars.next() {
Some(':') => {}
_ => return Err(DatetimeParseError { _private: () }),
}
let m1 = digit(&mut chars)?;
let m2 = digit(&mut chars)?;
match chars.next() {
Some(':') => {}
_ => return Err(DatetimeParseError { _private: () }),
}
let s1 = digit(&mut chars)?;
let s2 = digit(&mut chars)?;
let mut nanosecond = 0;
if chars.clone().next() == Some('.') {
chars.next();
let whole = chars.as_str();
let mut end = whole.len();
for (i, byte) in whole.bytes().enumerate() {
match byte {
b'0'..=b'9' => {
if i < 9 {
let p = 10_u32.pow(8 - i as u32);
nanosecond += p * u32::from(byte - b'0');
}
}
_ => {
end = i;
break;
}
}
}
if end == 0 {
return Err(DatetimeParseError { _private: () });
}
chars = whole[end..].chars();
}
let time = Time {
hour: h1 * 10 + h2,
minute: m1 * 10 + m2,
second: s1 * 10 + s2,
nanosecond,
};
if time.hour > 24 {
return Err(DatetimeParseError { _private: () });
}
if time.minute > 59 {
return Err(DatetimeParseError { _private: () });
}
if time.second > 59 {
return Err(DatetimeParseError { _private: () });
}
if time.nanosecond > 999_999_999 {
return Err(DatetimeParseError { _private: () });
}
Some(time)
} else {
offset_allowed = false;
None
};
// And finally, parse the offset
let offset = if offset_allowed {
let next = chars.clone().next();
if next == Some('Z') || next == Some('z') {
chars.next();
Some(Offset::Z)
} else if next.is_none() {
None
} else {
let sign = match next {
Some('+') => 1,
Some('-') => -1,
_ => return Err(DatetimeParseError { _private: () }),
};
chars.next();
let h1 = digit(&mut chars)? as i8;
let h2 = digit(&mut chars)? as i8;
match chars.next() {
Some(':') => {}
_ => return Err(DatetimeParseError { _private: () }),
}
let m1 = digit(&mut chars)?;
let m2 = digit(&mut chars)?;
Some(Offset::Custom {
hours: sign * (h1 * 10 + h2),
minutes: m1 * 10 + m2,
})
}
} else {
None
};
// Return an error if we didn't hit eof, otherwise return our parsed
// date
if chars.next().is_some() {
return Err(DatetimeParseError { _private: () });
}
Ok(Datetime {
date: full_date,
time,
offset,
})
}
}
fn digit(chars: &mut str::Chars<'_>) -> Result<u8, DatetimeParseError> {
match chars.next() {
Some(c) if ('0'..='9').contains(&c) => Ok(c as u8 - b'0'),
_ => Err(DatetimeParseError { _private: () }),
}
}
impl ser::Serialize for Datetime {
fn serialize<S>(&self, serializer: S) -> Result<S::Ok, S::Error>
where
S: ser::Serializer,
{
use serde::ser::SerializeStruct;
let mut s = serializer.serialize_struct(NAME, 1)?;
s.serialize_field(FIELD, &self.to_string())?;
s.end()
}
}
impl<'de> de::Deserialize<'de> for Datetime {
fn deserialize<D>(deserializer: D) -> Result<Datetime, D::Error>
where
D: de::Deserializer<'de>,
{
struct DatetimeVisitor;
impl<'de> de::Visitor<'de> for DatetimeVisitor {
type Value = Datetime;
fn expecting(&self, formatter: &mut fmt::Formatter<'_>) -> fmt::Result {
formatter.write_str("a TOML datetime")
}
fn visit_map<V>(self, mut visitor: V) -> Result<Datetime, V::Error>
where
V: de::MapAccess<'de>,
{
let value = visitor.next_key::<DatetimeKey>()?;
if value.is_none() {
return Err(de::Error::custom("datetime key not found"));
}
let v: DatetimeFromString = visitor.next_value()?;
Ok(v.value)
}
}
static FIELDS: [&str; 1] = [FIELD];
deserializer.deserialize_struct(NAME, &FIELDS, DatetimeVisitor)
}
}
struct DatetimeKey;
impl<'de> de::Deserialize<'de> for DatetimeKey {
fn deserialize<D>(deserializer: D) -> Result<DatetimeKey, D::Error>
where
D: de::Deserializer<'de>,
{
struct FieldVisitor;
impl<'de> de::Visitor<'de> for FieldVisitor {
type Value = ();
fn expecting(&self, formatter: &mut fmt::Formatter<'_>) -> fmt::Result {
formatter.write_str("a valid datetime field")
}
fn visit_str<E>(self, s: &str) -> Result<(), E>
where
E: de::Error,
{
if s == FIELD {
Ok(())
} else {
Err(de::Error::custom("expected field with custom name"))
}
}
}
deserializer.deserialize_identifier(FieldVisitor)?;
Ok(DatetimeKey)
}
}
pub struct DatetimeFromString {
pub value: Datetime,
}
impl<'de> de::Deserialize<'de> for DatetimeFromString {
fn deserialize<D>(deserializer: D) -> Result<DatetimeFromString, D::Error>
where
D: de::Deserializer<'de>,
{
struct Visitor;
impl<'de> de::Visitor<'de> for Visitor {
type Value = DatetimeFromString;
fn expecting(&self, formatter: &mut fmt::Formatter<'_>) -> fmt::Result {
formatter.write_str("string containing a datetime")
}
fn visit_str<E>(self, s: &str) -> Result<DatetimeFromString, E>
where
E: de::Error,
{
match s.parse() {
Ok(date) => Ok(DatetimeFromString { value: date }),
Err(e) => Err(de::Error::custom(e)),
}
}
}
deserializer.deserialize_str(Visitor)
}
}
impl fmt::Display for DatetimeParseError {
fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
"failed to parse datetime".fmt(f)
}
}
impl error::Error for DatetimeParseError {}
Sindbad File Manager Version 1.0, Coded By Sindbad EG ~ The Terrorists